DC Electronic Load System
Adjustable current slew rate, adjustable CV loop speed
Ultra high precision voltage & current measurement
Short circuit test mode
Auto mode function provides an easy way to do complicated test
Full protection: OCP, OPP, OTP, over voltage and reverse alarm
Provides four kinds of basic working mode such as CV/CC/CR/CP, and CV+CC/CV+CR/CR+CC complex operating modes
Equipped with Emergency Stop, physically off all managed DC eLoads at once
Back door with protect switch, safe to the operator
Front panel USB interface supports data import and export
Using standard SCPI communication protocol
Function & Advantage
This series High Power DC Load is equipped with flippable front panel for 4U, 7U, 10U and 13U height models. Together with a large color touch screen provides simple and fast operation for customer. Real-time update of display input data, status and graphical display makes it more intuitive.
Basic Operating Mode
This series High Power DC Load provides four kinds of basic operating mode including CV (constant voltage), CC (constant current), CR (constant resistance), CP (constant power), to satisfy a wide range of test requirements.
This series electronic load supports CV loop response speed setting to FAST, NORMAL or SLOW to satisfy different test requirements.This function may avoid the inaccurate measurement or testing fail caused by the response speed mismatch between the load and the power supply, which is possible to improve test efficiency and reduce costs on the equipments, time and expenses.
This series electronic load can be switched quickly between different values in the same operating mode, including CC dynamic mode, CV dynamic mode, CR dynamic mode and CP dynamic mode, CC/CR high speed dynamic mode up to 50kHz. This function is suitable for transient test of power supply, test of battery protection characteristic and battery pulse charging etc. Dynamic mode test has continuous mode, pulse mode and toggle mode.
It can be applied to track the maximum power point of solar panels. Through the maximum power point tracking method, the maximum power point of the solar panel can be dynamically searched all the time, which can maximize the effectiveness of solar panels.
Simulating capacitive loads makes the current draw closer to the real situation. It is mainly applied for simulating capacitive loads turn on and turn off test. It can prevent the power supply from charging the capacitors on the motherboard when the power is turned on suddenly, which will cause the inrush current to trigger the power supply over-current protection and make the power supply fail to start smoothly.
This series electronic load has battery discharge function, and can perform discharge test under CC, CR or CP mode. The DC load can set end volatge or time to stop loading correctly and make sure the battery is not damaged due to over discharge. The user can set stop conditions, whenever met any condition, the load will stop loading and counting automatically. During the test, users can observe battery's voltage, discharging time and already-discharged-capacity.
Options & Accessories
BNC cable (optional)Voltage / current output monitoring
USB communication cable(optional)For USB communication
RS-232 communication cable (standard)For RS-232 communication
Remote voltage sampling cable (standard)One red, one black
System bus communication cable (optional)Connect for master-slave communication
GPIB & LAN card & communication cable (optional)For communication between GPIB and LAN
Professional version upgrade software (optional)Upgrade version from advanced to professional
|Model||Voltage||Current||Power||Voltage Resolution||Current Resolution||Voltage Accuracy||Current Accuracy||Size|